LiFi
“LiFi is transmission of
data through illumination by taking the fiber out of fiber optics by
sending data through a LED light bulb that varies in intensity faster
than the human eye can follow”.
Li-Fi is the term some have used to label the fast and cheap wireless-communication system, which is the optical version of Wi-Fi.
The term was first used in this context by” Harald Haas” in his TED Global talk on Visible Light Communication.
The technology was demonstrated at the 2012 Consumer Electronics Show in Las Vegas using a pair of Casio smartphones to exchange data using light of varying intensity given off from their screens, detectable at a distance of up to ten metres.
In October 2011 a number of companies and industry groups formed the Li-Fi Consortium, to promote high-speed optical wireless systems and to overcome the limited amount of radio-based wireless spectrum available by exploiting a completely different part of the electromagnetic spectrum. The consortium believes it is possible to achieve more than 10 Gbps, theoretically allowing a high-definition film to be downloaded in 30 seconds.
Li-Fi has the advantage of being able to be used in sensitive areas such as in aircraft without causing interference. However, the light waves used cannot penetrate walls.
Later in 2012, VLC, a firm set up to commercialize Li-Fi, will bring out Li-Fi products for firms installing LED-lighting systems.
To
prove that the light bulb was the source of the data stream, he periodically blocked the beam of light, causing
the connection to drop.
LiFi
Technology:
The LED bulb will hold a micro-chip that will do the job of processing the data.
The
light intensity can be manipulated to send data by tiny changes in amplitude.
This
technology uses visible spectrum of light, a part of the electromagnetic
spectrum that is still not greatly utilized.
In
fact the technology transfers thousands of streams of data simultaneously, in
parallel, in higher speeds with the help of special modulation, using a unique
signal processing technology.
Some
Points of LiFi
The
light used to transmit the data is called D-light by Harald Hass, the inventor
of LiFi.
In future data for laptops,
Smartphone's, and tablets can be transmitted through the light in a room by
using LiFi.
Security would be a snap—if you can’t see the light, you can’t access the data.
Security would be a snap—if you can’t see the light, you can’t access the data.
Applications
of LiFi:
Can be used in the places where it is
difficult to lay the optical fiber like hospitals. In operation theatre LiFi
can be used for modern medical instruments.
In
traffic signals LiFi can be used which will communicate with the LED lights of the cars and accident numbers can
be decreased.
Thousand
and millions of street lamps can be transferred to LiFi lamps to transfer data.
In
aircraft LiFi can be used for data transmission.
It
can be used in petroleum or chemical plants where other transmission or
frequencies could be hazardous.
Conclusion:
The possibilities are numerous and
can be explored further. If his technology can be put into practical use, every
bulb can be used something like a Wi-Fi hotspot to transmit wireless data.
No comments:
Post a Comment